News

New multiaxis drive SMD2204L with CANopen, Modbus TCP and EtherCAT protocols

AEC s.r.l. is pleased to introduce its new multiaxis stepper drive. With the SMD2204L, a single drive can control up to three motors in vector mode with torque control. The drive permits a streamlined programming of each single axis, the management of digital and anlog inputs/outputs, besides the management via CANopen, Modbus TCP or EtherCAT protocol.


For further information, visit this page or contact us.

Nuovo azionamento passo passo EtherCAT SMD5106xIT

AEC s.r.l. is pleased to introduce the new stepper motor drive SMD5106xIT, with EtherCAT communication protocol.

For further information, visit this page or contact us.

New Modbus TCP/IP stepper drive SMD1104LIE

AEC s.r.l. is pleased to introduce the new stepper motor drive SMD1104LIE, with Modbus Ethernet TCP/IP communication protocol.

For further information, visit this page or contact us.

NEMA 17 stepper motors with integrated encoder

The range of AEC servomotors widens: Nema 17 flange model are available now.
Ideal for micromovements and format-changeovers, thanks to their compact size, the stepper motor series M42SH are equipped with terminal box, Push Pull or Line Driver encoders, and M12 connectors output.

New worm servomotorgearboxes IWormGearSmart

AEC s.r.l. is pleased to introduce its new series of worm servomotorgearboxes IWormGearSmart.

With its features, this economic series is the answer to the increasingly demand of the market for high performance systems, either in terms of accuracy and efficiency.

Stepper planetary gearmotors combined with Nema 17 motors with encoder

New series of stepper planetary gearmotors combined with Nema 17 motors.

- Very compact dimensions

- Uotput torque up to 9Nm

- Backlash < 3'

- Reduction ratio from 1:3 up to 1:100

EB34 holding brake with M12 circular connector

The EB34 is an negative single disc electromagnetic brake, closed by a spring mechanism and equipped with NEMA 34 flange for an easy and quick mounting.
It is used for a dry run as an holding or security brake.
The new version with M12 circular connector permits to reduce wiring time and to eliminate connection errors.

For further information, visit this page or contact us.

AREAS OF APPLICATION

Click here to find out some of the industry sectors in which our products are used.

PLUG-FEST CanOPEN SIPRO-AEC

We successfully tested the CANopen communication between SIPRO Motion Controllers and AEC  stepper motor drives. In particular:

- DS402 Profile Position Mode.
- Homing Mode.
- Interpolation Profile Mode.
- Continuous Mode.

NEW LOW COST STEPPER DRIVE SMD103B

AEC s.r.l. is pleased to introduce the new LOW COST step/direction drive for stepper motors.

The SMD103B is a step/direction stepper drive, characterised by compact size and ease of installation and use. It is the ideal choice to drive stepper motors up to Nema 24 size.

For further information, visit this page or contact us.

Stepper motor drives with SSI encoder input

AEC s.r.l. is pleased to inform you that our stepper motor drives series SMD50.06xIM are equipped with with an input for the reading of SSI absolute encoders.

PLUG-FEST CanOPEN Robox-AEC

We successfully tested the communication between ROBOX Motion Controllers and AEC  stepper motor drives. In particular:

- Mailbox.
- Interpolated mode.
- Synchronous quota reading.
- DS402 state machine.
- POWER-SET operation.

PLUG-FEST CanOPEN QEM-AEC

We successfully tested the CANopen communication between QEM Motion Controllers and AEC  stepper motor drives. In particular:

- DS402 Profile Position Mode.
- Homing Mode.
- Interpolation Profile Mode.
- Continuous Mode.

NEW LOW COST STEPPER MOTOR DRIVES

AEC s.r.l. is pleased to introduce the new series of low cost vector stepper drives.

The high smoothness of the movement, in addition to the silent operation, makes these drives particularly indicated for the use in electromedical applications, laboratories, CNC systems, and in general in all the applications where it is required an accurate control of the motor.

15/06/2011

AEC s.r.l. is pleased to introduce its new website.

The new graphic and contents are designed to supply a complete service, in order to help you to develop your automation needs.

By registering, it is possible to download all the documentation about AEC products.